M40 RTK

1. The control points during scanning should correspond one to one with the control points on site.

2. High error control points will reduce the overall accuracy and should be removed.

3. The control points should not be set on a straight line.

1. A high-precision solution will increase the solution time.

2. High-precision solutions will increase the amount of generated data.

1. Check if the input central meridian is in the format of "degrees, seconds, minutes";

2. Whether both anchor point function and RTK are enabled.

3. If the problem is not as mentioned above, please contact official technical support.

1. Panoramic video: Check if the Insta camera is in time-lapse mode and make sure it is moving during the capture.

2. Check the software installation path. If the software is installed on the system disk, you need to use administrator privileges to start it.

3. Video content: Check whether the panoramic video has large-scale overexposure or dark scenes.

4. If the problem is not as mentioned above, please contact official technical support.